Push ltpzonnnkpqs #79

Merged
coissac merged 3 commits from push-ltpzonnnkpqs into main 2026-10-16 14:43:51 +00:00
12 changed files with 177 additions and 103 deletions
Showing only changes of commit 7c7d7615cb - Show all commits

No files matched your search

+28 -1
View File
@@ -329,7 +329,34 @@ Global family-size histogram (`global` row): 34 047 616 087 families; sizes 1 /
**`_dist.phy` (not asked for).** 180 × 180, symmetric, values 0.456-0.99999, median 0.999; Spearman with the Mash matrix 0.9999998 and with the index overlap −0.95, so it carries Mash-like information, consistent with the `jaccard` default (not verified). `args::distance_to_compute` at HEAD computes no matrix for this command line; why the file exists is unknown (binary predating the change, or a leftover; not checked). Not used above.
**Not measured:** any tree-level effect (sCF, species monophyly, support at the interface nodes 209/216 where `sN` was 17 and 7); the separate contribution of entropy, quartet and pair balance (needs ablation runs: without `--entropy`, without `--pair-balance`, `--quartet` alone); variance between draws (one draw per setting); clade-stratified 4-way coverage; the new alignment has not been given to IQ-TREE.
**Not measured:** any tree-level effect (sCF, species monophyly, support at the interface nodes 209/216 where `sN` was 17 and 7); the separate contribution of entropy, quartet and pair balance (needs ablation runs: without `--entropy`, without `--pair-balance`, `--quartet` alone); variance between draws (one draw per setting); clade-stratified 4-way coverage; the new alignment had not been given to IQ-TREE (done 2026-10-16: see the last measured section).
## Tree-level effect of the combined draw: sCF on three trees (measured 2026-10-16)
Closes the "not measured" item of the previous section (the combined alignment given to IQ-TREE). Three trees, all sCF by `--scfl 100 --cf-verbose`, model `GTR+G4+ASC`:
- **A** = `concord` (12/10): entropy-only draw, 180 genomes, 5 003 414 columns; `-t` + `-m` re-ran a full ML search (59 h).
- **B** = `concord_quartet_balance`: combined draw (`--entropy 1 --quartet --pair-balance`), 180 genomes, 5 000 000 columns. Its log stops during the tree search (14/10), so the command that produced its `cf.*` (16/10) is not in the files; presumably `-te` on the 15/10 treefile as for G (unverified).
- **G** = `scf_good`: same draw as B without the 3 data-poor genomes (*A. pyrenaica* PHA000543, *A. saussurei*, *A. triflora*), 177 genomes. 72 sites became invariant and were removed to satisfy ASC; the search (`concord_quartet_balance_good`, 107 iterations, 6 h 47 on 120 threads) crashed in the sCF step on the FASTA (`Assertion all_prob_const < 1.0`; cause untested, ASC with constant sites is a suspect). sCF were recomputed with `-te <treefile> -s <varsites.phy> -m GTR+G4+ASC --scfl 100`: **no search** (0 iterations, lnL −41 053 676.53 vs −41 053 676.41 from the search), 4 999 729 columns. A used `-t`, B/G a fixed tree: the protocols differ.
| | A | B | G |
|---|---|---|---|
| Branches | 177 | 177 | 174 |
| Mean `sN` | 3 219 | 13 163 | 13 396 |
| Branches with `sN` < 100 / < 1 000 | 13 / 50 | 0 / 5 | 0 / 2 |
| Median sCF | 44.2 | 42.9 | 42.8 |
| Branches with sCF < 40 / ≥ 70 | 74 / 28 | 67 / 26 | 69 / 25 |
| *Primula* and *Androsace* monophyletic | no / no | no / no | yes / yes |
**Sampling effect (A → B, same 180 genomes).** `sN` ×4.5 and the scarcity is gone. Sites do not become more concordant: on the 113 shared bipartitions (of 177) median sCF 48.0 → 47.3 (44 up, 69 down). Robinson-Foulds 128: the draw rearranged the tree deeply. Consistent with the earlier reading that the intra-*Androsace* conflict is not a matter of site count; the number of branches with sCF < 40 % stays around 70.
**Interface nodes.** Of the old nodes 209/211/212/216/217 (`sN` 17 / 226 / 184 / 7 / 7) none exists in G. Node 208 survives with `sN` 190 → 5 218 (sCF 54.5 → 37.5). Six mixed clades remain in G (83 to 72 tips, 50 *Primula* + 22-33 *Androsace*), all with `sN` > 3 000.
**Effect of the 3 genomes (B → G, same draw).** RF 16 (166 of 174 shared), median sCF 43.2 → 43.6, median `sN` unchanged. In B, *A. pyrenaica* and *A. triflora* sit inside *Primula* (a clade of 52 tips = 50 *Primula* + these 2; each has a *Primula* sister, sCF 92 % and 52 %, `sN` 556 and 153); *A. saussurei* stays with *Androsace*. Removing them restores both monophylies and changes nothing else measurably: support for "too little data to place them" (data-poor section), not for contamination, though the latter is not excluded.
**Where A and G disagree (2026-10-16).** On the 177 common tips: 124 shared bipartitions, 50 only in A, 50 only in G. Differing bipartitions are weakly supported in both trees (median sCF 35.7 in A-only, 37.7 in G-only, versus 47.5-48.1 on the shared ones), so the disagreement sits where support was already low. Differences are mostly local: the closest bipartition of the other tree is 1 tip away for 25 of 50 A-only and 21 of 50 G-only splits (≤ 2 tips: 37 and 30); only 8 and 9 are 5+ tips apart. Greedy removal of the tip that lowers RF most: the first (*P. auricula* subsp. *serratifolia*) takes RF from 100 to 86, then about 2 per tip (*A. maxima*, *P. stricta* var. *obesior*, then ordinary tips); the top three are data-poor genomes. A bipartition separates a data-poor genome (the 5 left after the 3 removals) in 1 of 124 shared splits but in 23 of 50 A-only and 10 of 50 G-only splits; removing those 5 genomes gives RF 72, against 96.6 (range 90-100, 40 draws) for 5 random tips. So about 28 of the 100 differences trace to data-poor genomes, and the remaining 72 do not. Backbone: A has a clade of 50 *Primula* + 25 *Androsace* (sCF 76, `sN` 453), G one of 50 + 26 (sCF 73, `sN` 6 677): one tip apart. Genuine conflict: a clade of 72 *Androsace* exists in both trees (A: sCF 34, `sN` 17 127; G: sCF 38, `sN` 49 473) with 16 different tips, i.e. a topological disagreement carried by tens of thousands of sites in each, not a scarcity effect; consistent with the intra-*Androsace* conflict above.
**Not established.** Separate contribution of entropy / quartet / pair balance (no ablation); stability of the tree between two independent draws (one draw per setting; A → B shows the topology moves with the draw); whether the quartet-informative restriction biases branch lengths (ASC corrects for variable-only ascertainment, not for requiring two states each in two genomes; tree length 22.5 is not interpretable as substitutions/site).
## Open questions
+1 -1
View File
@@ -48,7 +48,7 @@ See [Central-position SNP model](../theory/phylogeny/snp_based/central_snp_model
| Option | Description |
|---|---|
| `--sibling-annex` | Build (or rebuild) the sibling-count/minorant annex — prerequisite for every option in this section, and for a `snp-*` `--distance` value |
| `--sibling-annex` | Build (or rebuild) the sibling-count/minorant annex, then every annex derived from it (entropy, quartet, pair weight, family overlap, under both `--no-ambiguity` conventions). Every option in this section needs the sibling annex, and builds it by itself, under an exclusive lock on the index, if it is missing (as it is after `migrate-mphf`); running `--sibling-annex` first does the same work once, which is the safe way to start several `phylo` runs on the same index at the same time |
| `--sibling-stats` | Write `<prefix>_siblings.csv`: the family-size distribution, per genome and globally |
| `--sibling-hist` | Print the global family-size histogram (1-4 members) only |
| `--family-overlap` | Write `<prefix>_family_overlap.csv`: for every genome pair, how many variable families both genomes carry a call for |
+1 -1
View File
@@ -1537,7 +1537,7 @@ dependencies = [
[[package]]
name = "obikmer"
version = "1.3.6"
version = "1.4.0"
dependencies = [
"clap",
"csv",
@@ -17,6 +17,7 @@ use super::entropy::{family_entropy, family_entropy_4};
use super::family_scan::{Selection, scan_layer_families};
use super::is_fast_mode;
use super::minorant_selection::non_monomorphic_reindex_layer;
use crate::siblings::extensions::SiblingBuilder;
/// One variable family, as `--shannon` reports it.
pub(crate) struct FamilyEntropyRow {
@@ -45,6 +46,7 @@ pub(crate) fn scan_family_entropies(
cache: &IndexCache,
mut visit: impl FnMut(&FamilyEntropyRow) -> io::Result<()>,
) -> OKIResult<()> {
cache.ensure_sibling_annex()?;
let n_genomes = cache.meta().genomes().len();
let fast_mode = is_fast_mode(cache);
let pb = progress_bar("shannon_entropy", cache.n_partition() as u64, "partitions");
@@ -54,7 +54,7 @@ use obipipeline::ThrottleGuard;
use crate::siblings::helpers::central_base;
use crate::siblings::iter::{SiblingEntry, SiblingLayerExt};
use crate::siblings::{ANNEX_FILE_NAME, FamilyMask, SiblingAnnex};
use crate::siblings::{FamilyMask, SiblingAnnex};
/// Target memory budget for one batch's `genome_mask` allocation
/// (`family_batch_size(n_genomes) * n_genomes` bytes, see below) — bounding
@@ -180,7 +180,7 @@ pub(crate) fn scan_layer_families(
})?;
let n_cols = mat.n_cols().min(n_genomes);
let layer_dir: &Path = mat.dir();
let annex = Arc::new(SiblingAnnex::open(&layer_dir.join(ANNEX_FILE_NAME)).map_err(OKIError::Io)?);
let annex = Arc::new(SiblingAnnex::open_in(layer_dir).map_err(OKIError::Io)?);
let ctx = Arc::new(LayerCtx { mat, n_parts, n_genomes, n_cols, k });
@@ -11,7 +11,7 @@ use std::path::Path;
use obicompactvec::TempBitVecBuilder;
use obikindex::{OKIError, OKIResult};
use crate::siblings::{ANNEX_FILE_NAME, FamilyMask, FamilyScalarAnnex, ScalarKind, SiblingAnnex};
use crate::siblings::{FamilyMask, FamilyScalarAnnex, ScalarKind, SiblingAnnex};
pub(crate) fn is_non_monomorphic_minorant(mask: FamilyMask) -> bool {
mask.is_minorant() && mask.siblings() >= 1
@@ -31,7 +31,7 @@ pub(crate) fn is_non_monomorphic_minorant(mask: FamilyMask) -> bool {
/// the `Selection` a caller needs to bound `scan_layer_families` to just
/// these families.
pub(crate) fn non_monomorphic_reindex_layer(layer_dir: &Path) -> OKIResult<HashMap<usize, usize>> {
let annex = SiblingAnnex::open(&layer_dir.join(ANNEX_FILE_NAME)).map_err(OKIError::Io)?;
let annex = SiblingAnnex::open_in(layer_dir).map_err(OKIError::Io)?;
let mut reindex = HashMap::new();
let mut family_idx = 0usize;
for slot in 0..annex.len() {
@@ -62,7 +62,7 @@ pub(crate) fn non_monomorphic_reindex_layer(layer_dir: &Path) -> OKIResult<HashM
/// first counts this layer's total minorants (needed up front to size the
/// bitset), the second sets the eligible bits.
pub(crate) fn eligible_bitset_layer(layer_dir: &Path) -> OKIResult<TempBitVecBuilder> {
let annex = SiblingAnnex::open(&layer_dir.join(ANNEX_FILE_NAME)).map_err(OKIError::Io)?;
let annex = SiblingAnnex::open_in(layer_dir).map_err(OKIError::Io)?;
let n_minorants = (0..annex.len())
.filter(|&slot| annex.get(slot).is_some_and(|m| m.is_minorant()))
@@ -103,7 +103,7 @@ pub(crate) fn iter_full_scalar(
kind: ScalarKind,
no_ambiguity: bool,
) -> OKIResult<impl Iterator<Item = f32> + use<>> {
let annex = SiblingAnnex::open(&layer_dir.join(ANNEX_FILE_NAME)).map_err(OKIError::Io)?;
let annex = SiblingAnnex::open_in(layer_dir).map_err(OKIError::Io)?;
let scalars =
FamilyScalarAnnex::open(&layer_dir.join(kind.file_name(no_ambiguity)), kind).map_err(OKIError::Io)?;
if scalars.no_ambiguity() != no_ambiguity {
@@ -8,7 +8,7 @@ use obikindex::{OKIError, OKIResult};
use super::minorant_selection::is_non_monomorphic_minorant;
use crate::siblings::quartet_annex::quartet_annex_file_name;
use crate::siblings::{ANNEX_FILE_NAME, SiblingAnnex};
use crate::siblings::SiblingAnnex;
/// Clears, in `eligible` (indexed by `family_idx`, monomorphic minorants
/// included), every family the quartet annex flags as not quartet-informative
@@ -22,7 +22,7 @@ pub(crate) fn restrict_to_quartet(
layer_dir: &Path,
no_ambiguity: bool,
) -> OKIResult<()> {
let annex = SiblingAnnex::open(&layer_dir.join(ANNEX_FILE_NAME)).map_err(OKIError::Io)?;
let annex = SiblingAnnex::open_in(layer_dir).map_err(OKIError::Io)?;
let flags = PersistentBitVec::open(&layer_dir.join(quartet_annex_file_name(no_ambiguity)))
.map_err(OKIError::Io)?;
+9 -16
View File
@@ -9,11 +9,12 @@
//! already stored — no re-derivation, no lookup).
use obikidxcache::index_cache::IndexCache;
use obikindex::{OKIError, OKIResult};
use obikindex::OKIResult;
use super::family_scan::{Selection, scan_layer_families};
use super::is_fast_mode;
use crate::siblings::{ANNEX_FILE_NAME, SiblingAnnex};
use crate::siblings::SiblingAnnex;
use crate::siblings::extensions::SiblingBuilder;
/// Layers scanned at once per [`sibling_family_size_histogram`]'s
/// `par_map_reduce` call — same bounding reasoning as
@@ -45,26 +46,17 @@ pub struct SiblingAnnexStats {
/// on top of that would fight it for cache/mmap locality) — this function
/// has no such inner parallelism to protect.
///
/// Existence of every cached layer's annex file is checked up front, before
/// the parallel map runs, so a missing one is reported as an error rather
/// than silently read back as zero.
/// A missing annex is built up front (`ensure_sibling_annex`), before the
/// parallel map runs, so none is silently read back as zero.
pub(crate) fn sibling_family_size_histogram(cache: &IndexCache) -> OKIResult<[u64; 4]> {
for (part, l, layer) in cache.iter_indexed() {
let path = layer.dir().join(ANNEX_FILE_NAME);
if !path.exists() {
return Err(OKIError::InvalidInput(format!(
"no sibling annex at {} (partition {part}, layer {l}) — run --sibling-annex first",
path.display()
)));
}
}
cache.ensure_sibling_annex()?;
Ok(cache.par_map_reduce(
MAX_CONCURRENT_LAYERS,
|| [0u64; 4],
|layer| {
let annex = SiblingAnnex::open(&layer.dir().join(ANNEX_FILE_NAME))
.expect("existence already checked before this parallel map ran");
let annex = SiblingAnnex::open_in(layer.dir())
.expect("ensure_sibling_annex already made every layer's annex exist");
let mut counts = [0u64; 4];
for slot in 0..annex.len() {
let Some(mask) = annex.get(slot) else { continue };
@@ -95,6 +87,7 @@ pub(crate) fn sibling_family_size_histogram(cache: &IndexCache) -> OKIResult<[u6
/// same reasoning `SiblingExt::build_sibling_annex`/`shannon_entropy_csv`/
/// `algorithms::scan::sampled_scan` already follow).
pub(crate) fn sibling_annex_stats(cache: &IndexCache) -> OKIResult<SiblingAnnexStats> {
cache.ensure_sibling_annex()?;
let n_genomes = cache.meta().genomes().len();
let fast_mode = is_fast_mode(cache);
@@ -241,6 +241,9 @@ pub(crate) fn sample_index(
skip_layers: usize,
mut on_layer: impl FnMut(usize, usize, usize, Arc<Vec<SurvivingFamily>>),
) -> OKIResult<SamplePlan> {
// Every selection below reads the sibling annex (`eligible_bitset_layer`),
// whichever derived annexes the options ask for.
cache.ensure_sibling_annex()?;
let n_genomes = cache.meta().genomes().len();
let fast_mode = is_fast_mode(cache);
@@ -9,13 +9,16 @@
use obikidxcache::index_cache::IndexCache;
use obikindex::{OKIError, OKIResult};
use obisys::progress_bar;
use obisys::{DirLock, progress_bar};
use crate::siblings::algorithms::{
AnnexRequest, ensure_layer_family_annexes, ensure_layer_pair_weight_annexes,
inverse_overlap_matrix, is_fast_mode,
AnnexRequest, build_layer_sibling_annex, ensure_layer_family_annexes,
ensure_layer_pair_weight_annexes, inverse_overlap_matrix, is_fast_mode,
};
use crate::siblings::{
ANNEX_FILE_NAME, FAMILY_OVERLAP_FILE_NAMES, FamilyOverlap, FamilyOverlapAccumulator,
QUARTET_ANNEX_FILE_NAMES, ScalarKind, family_overlap_file_name,
};
use crate::siblings::{FamilyOverlap, FamilyOverlapAccumulator, family_overlap_file_name};
pub(crate) trait SiblingBuilder {
/// Build, for every cached layer, the annexes `request` asks for that
@@ -29,10 +32,110 @@ pub(crate) trait SiblingBuilder {
/// finished overlap matrix. A no-op, cheap existence-check pass, once
/// everything requested already exists.
fn ensure_family_annexes(&self, request: &AnnexRequest) -> OKIResult<()>;
/// Build the sibling annex (`siblings.psib`, every annex above is derived
/// from it) if any cached layer lacks it — the state of an index right
/// after `migrate-mphf`, which sets every annex aside. The build writes
/// into every layer, so it runs under the index's exclusive
/// [`DirLock`]; a process that waited for it finds the annex built by the
/// one that held it, and does nothing. A no-op, cheap existence-check
/// pass, once every layer has its annex. Must not be called while this
/// process already holds the lock *and* an annex is missing (the lock is
/// not reentrant); `--sibling-annex` holds it but builds the annex first.
fn ensure_sibling_annex(&self) -> OKIResult<()>;
/// (Re)build the sibling annex of every cached layer, unconditionally,
/// removing the annexes derived from it (entropy, quartet, pair weight,
/// family overlap), which its renumbering makes stale. Takes no lock:
/// the caller holds it (`--sibling-annex`) or goes through
/// [`ensure_sibling_annex`](Self::ensure_sibling_annex).
fn build_base_sibling_annex(&self) -> OKIResult<()>;
}
impl SiblingBuilder for IndexCache {
fn ensure_sibling_annex(&self) -> OKIResult<()> {
let missing = || self.iter_indexed().any(|(_, _, layer)| !layer.dir().join(ANNEX_FILE_NAME).exists());
if !missing() {
return Ok(());
}
let _lock = DirLock::acquire(self.index().dir()).map_err(OKIError::Io)?;
if !missing() {
return Ok(()); // built by the process we waited for
}
tracing::info!("sibling annex missing — building it");
self.build_base_sibling_annex()
}
fn build_base_sibling_annex(&self) -> OKIResult<()> {
let n_parts = self.index().n_partitions();
let fast_mode = is_fast_mode(self);
if !fast_mode {
tracing::warn!(
"index has more than 7 layers per partition — sibling-annex fast layer lookup \
disabled; consider compacting this index"
);
}
let pb = progress_bar("sibling_annex", self.n_partition() as u64, "partitions");
let mut total_slots: u64 = 0;
for part in self.partitions() {
let n_layer = self.n_layer(part).unwrap_or(0);
let mut part_slots: u64 = 0;
for l in 0..n_layer {
let layer = self
.get_layer(part, l)
.expect("cache-consistent: n_layer(part) already bounds l");
// Invalidate this layer's entropy, quartet and pair-weight
// annexes, if any — they were built against the sibling
// annex's *previous* `family_idx` numbering
// (`non_monomorphic_reindex_layer` reads the sibling
// annex), and are stale once the new one exists.
// `ensure_family_annexes` only builds what's *missing*, so
// the old files must be removed here for them to be rebuilt
// rather than silently left stale. Removed *before* the new
// annex is built and published (atomically, at its end): a
// build killed in between leaves the previous annex with no
// derived files — still consistent, rebuilt on demand —
// never a new annex next to derived files computed against
// the old numbering.
for name in ScalarKind::Entropy
.file_names()
.into_iter()
.chain(ScalarKind::PairWeight.file_names())
.chain(QUARTET_ANNEX_FILE_NAMES)
{
let derived_path = layer.dir().join(name);
if derived_path.exists() {
std::fs::remove_file(&derived_path).map_err(OKIError::Io)?;
}
}
part_slots += build_layer_sibling_annex(self, &layer, l, n_parts, fast_mode)?;
}
total_slots += part_slots;
pb.inc(1);
pb.set_message(format!(
"partition {part}: {part_slots} kmers ({total_slots} total)"
));
}
pb.finish_and_clear();
tracing::info!("sibling annex built — {total_slots} kmers across {n_parts} partitions");
// The family-overlap annexes are index-level, not per-layer (see
// their own module docs) — any layer's sibling annex changing makes
// them all stale (and, with them, every pair weight computed from
// them, removed per layer above), so they are invalidated once here
// rather than per-layer above.
for name in FAMILY_OVERLAP_FILE_NAMES {
let overlap_path = self.index().dir().join(name);
if overlap_path.exists() {
std::fs::remove_file(&overlap_path).map_err(OKIError::Io)?;
}
}
Ok(())
}
fn ensure_family_annexes(&self, request: &AnnexRequest) -> OKIResult<()> {
self.ensure_sibling_annex()?;
let n_genomes = self.meta().genomes().len();
let fast_mode = is_fast_mode(self);
let overlap_path = |no_ambiguity: bool| self.index().dir().join(family_overlap_file_name(no_ambiguity));
@@ -11,17 +11,12 @@ use std::path::Path;
use obikidxcache::index_cache::IndexCache;
use obikindex::{OKIError, OKIResult};
use obisys::progress_bar;
use crate::siblings::algorithms::{
AnnexRequest, EntropySummary, SiblingAnnexStats, build_layer_sibling_annex, is_fast_mode,
scan_family_entropies, sibling_annex_stats, sibling_family_size_histogram,
AnnexRequest, EntropySummary, SiblingAnnexStats, scan_family_entropies, sibling_annex_stats, sibling_family_size_histogram,
};
use crate::siblings::extensions::SiblingBuilder;
use crate::siblings::{
FAMILY_OVERLAP_FILE_NAMES, FamilyOverlap, QUARTET_ANNEX_FILE_NAMES, ScalarKind,
family_overlap_file_name,
};
use crate::siblings::{FamilyOverlap, family_overlap_file_name};
pub trait SiblingExt {
/// Build the sibling-count/minorant annex for every layer of every
@@ -111,71 +106,7 @@ pub trait SiblingExt {
impl SiblingExt for IndexCache {
fn build_sibling_annex(&self) -> OKIResult<()> {
let n_parts = self.index().n_partitions();
let fast_mode = is_fast_mode(self);
if !fast_mode {
tracing::warn!(
"index has more than 7 layers per partition — sibling-annex fast layer lookup \
disabled; consider compacting this index"
);
}
let pb = progress_bar("sibling_annex", self.n_partition() as u64, "partitions");
let mut total_slots: u64 = 0;
for part in self.partitions() {
let n_layer = self.n_layer(part).unwrap_or(0);
let mut part_slots: u64 = 0;
for l in 0..n_layer {
let layer = self
.get_layer(part, l)
.expect("cache-consistent: n_layer(part) already bounds l");
// Invalidate this layer's entropy and quartet annexes, if
// any — they were built against the sibling annex's
// *previous* `family_idx` numbering
// (`non_monomorphic_reindex_layer` reads the sibling
// annex), and are stale once the new one exists.
// `ensure_family_annexes` below only builds what's
// *missing*, so the old files must be removed here for
// them to be rebuilt rather than silently left stale.
// Removed *before* the new annex is built and published
// (atomically, at its end): a build killed in between
// leaves the previous annex with no derived files — still
// consistent, rebuilt on demand — never a new annex next to
// derived files computed against the old numbering.
for name in ScalarKind::Entropy
.file_names()
.into_iter()
.chain(ScalarKind::PairWeight.file_names())
.chain(QUARTET_ANNEX_FILE_NAMES)
{
let entropy_path = layer.dir().join(name);
if entropy_path.exists() {
std::fs::remove_file(&entropy_path).map_err(OKIError::Io)?;
}
}
part_slots += build_layer_sibling_annex(self, &layer, l, n_parts, fast_mode)?;
}
total_slots += part_slots;
pb.inc(1);
pb.set_message(format!(
"partition {part}: {part_slots} kmers ({total_slots} total)"
));
}
pb.finish_and_clear();
tracing::info!("sibling annex built — {total_slots} kmers across {n_parts} partitions");
// The family-overlap annexes are index-level, not per-layer (see
// their own module docs) — any layer's sibling annex changing makes
// them all stale (and, with them, every pair weight computed from
// them, removed per layer above), so they are invalidated once here
// rather than per-layer above.
for name in FAMILY_OVERLAP_FILE_NAMES {
let overlap_path = self.index().dir().join(name);
if overlap_path.exists() {
std::fs::remove_file(&overlap_path).map_err(OKIError::Io)?;
}
}
self.build_base_sibling_annex()?;
// Precompute the entropy and family-overlap annexes too, now that
// every layer's fresh sibling annex is on disk
// (`non_monomorphic_reindex_layer`, which both depend on, reads
@@ -269,6 +269,21 @@ impl SiblingAnnex {
Ok(Self { mmap, n, path: path.to_path_buf() })
}
/// The annex of the layer directory `layer_dir`. Same as
/// [`open`](Self::open), except that an absent file is reported with its
/// path and the way to build it, rather than a bare `NotFound` — the
/// state an index is in right after `migrate-mphf` set its annexes aside.
pub fn open_in(layer_dir: &Path) -> io::Result<Self> {
let path = layer_dir.join(super::ANNEX_FILE_NAME);
Self::open(&path).map_err(|e| match e.kind() {
io::ErrorKind::NotFound => io::Error::new(
io::ErrorKind::NotFound,
format!("no sibling annex at {} — build it with `phylo --sibling-annex`", path.display()),
),
_ => e,
})
}
pub fn path(&self) -> &Path { &self.path }
pub fn len(&self) -> usize { self.n }
pub fn is_empty(&self) -> bool { self.n == 0 }